HardwareProjects - Phone Holder
April 2016
Designed to hold Samsung Galaxy Centura phones perpendicular to the table, these holders
are both artistic and functional
Key components -- the USB connector and camera -- are unimpeded by the design of the holder.
Print time is 90 minutes.
Key components -- the USB connector and camera -- are unimpeded by the design of the holder.
Print time is 90 minutes.
Key features:
- The arcs at the top are shallow enough to print without overhang and trace around the micro USB power input.
- The cross-bars in the middle hold the halfs together, while also resting the phone at the same height as the base layer.
- All arcs are filled-in on the outside, to more easily print the holder.