About

Phone Holder was a small project to create a horizontal mount for cheap cell phones.

Designed to hold Samsung Galaxy Centura phones perpendicular to the table, these holders are both artistic and functional

Key components – the USB connector and camera – are unimpeded by the design of the holder.

Print time is 90 minutes.

Key features:

• The arcs at the top are shallow enough to print without overhangs and to trace around the micro USB power input.
• The crossbars in the middle hold the halfs together, while also resting the phone at the same height as the base layer.
• All arcs are filled-in on the outside, to more easily print the holder.